HP M2350A Service Manual page 163

Mounting the Components
InstaJling Options 001, 002, 007, 008
2. Slide the pole mount (HP M1276-40003) onto the back of the remote rack as shown in
Figure 6-21. The pole mount will snap into position once properly attached.
/
REMOTE
RACK
Figure 6-21. Attaching the Pole Mount
3. 'Secure the remote rack to the rack stand using four screws (HP 0515-1040) as shown in
Figure 6-22. The installation is now complete.
4 SCREWS
(0515-1040)
Figure 6-22. Securing the Remote Rack
6-21