HP M2350A Service Manual page 172

Mounting the Components
Installing A-Option Mounts
Warning
If you are hanging heavy equipment (over 25 kg [50 lbs]) the installation
must always be performed by TWO people.
Step 5 Equally space the extended top support arms and tighten the securing screws and
keep nuts.
Step 6
Turn in the knobs on the bottom support arms to position the equipment at the
desired tilt angle.
If mounting a Computer Module and 14" Display Module combined, ensure
that the equipment is properly cam-locked together, using the procedures
described earlier in this chapter.
6.30