HP M2350A Service Manual page 157

Mounting the Components
Installing Options 001, 002, 007, 008
a
7. Secure the joiner bracket using two of the machine screws (HP 0515-0885) supplied with
your installation kit, as shown in Figure 6-10.
Figure 6-10. Securing the Joiner Bracket
8. Refer to Figure 6-11. Slide the stack mount platform over the top of the joiner bracket and
insert the end of the platform into the top ventilation slot at the jfront of the display. The
two holes in the platform will align with two holes on the top of the joiner bracket.
Figure 6-l 1. Attaching the Stack Mount Platform
6-15