Status Log; Monitor Revisions; Hardware Revision; Software Revision - HP M2350A Service Manual

Troubleshooting the System
Selecting Service Mode
a
Status Log
Information about the status of the various boards and components of the Computer Module
is provided in the Status Log. This information can be accessed in Monitoring Mode as well
as Service Mode. A description of how to enter
the
Status Log, and information about the
contents of the Status Log, are provided under in this chapter.
Monitor Revisions
The system has a revision log facility which provides information on the revision status of the
hardware and software. These revision screens can be accessed in the monitoring and service
modes.
Hardware Revision
The hardware revision screen describes the contents of the Computer Module as follows:
Slot Number
Card Name (e.g. APP-CPU)
Part Number (e.g. M1066-66501)
Fiiware Revision (e.g. 01)
Software Revision
The software revision screen describes the system serial number and model, as well as the
contents of the EPROM cards as follows:
a
For the system
Serial Number (e.g. 2CXXXXXGXXXXX)
Model Number (e.g. 66)
For each EPROM card
Slot Number
EPROM Package
Part Number
'lb Enter
A Revision Screen
Step 1
h!.SS
CMonitor Setup),
Step 3
Press the key corresponding to the required revision screen. @&$?~%;i::WW~ or
., . ..".22. ,:. .:;,..;:...1:...?. ,>,i ;.
i~~-~~~,~~~~~~~.
/.; .,/ :, ,,,., s.,. .:,:,.. .: ..;.-I ;:.;: ,: ,:_.:.l:.'
9.23