Connecting The Display; Connecting The Stand - HP L200x User Manual

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.

Connecting the stand

1.
Place the monitor with its front facing downward on
a soft cloth.
2.
Assemble the Stand Body into the
product in the correct direction as shown in
the picture. Make sure you push it until you
hear it "click".
Stand Body
4.
Use a coin on the back of the stand base and turn the screw clockwise to tighten.
5.
Once assembled take the monitor up carefully and face the front side
Important
This illustration depicts the general model of connection. Your monitor may di er from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
3.
Assemble the Stand Base(Front,
Rear) into the Stand Body in the
correct direction.
Hinge Body
Stand Body
E50
Stand Base
.