Download  Print this page

HP Compaq CV5500 Reference Manual

Hp compaq cv5500: reference guide.
Hide thumbs

Advertisement

Reference Guide
CRT Monitors 5500, v72, mx704, 7500,
7550, 9500
Document Part Number: 346224-002
January 2004
This guide provides information on setting up the monitor,
installing drivers, using the on-screen display menu,
troubleshooting, regulatory notices, and technical specifications.

Advertisement

Table of Contents

   Also See for HP Compaq CV5500

   Related Manuals for HP Compaq CV5500

   Summary of Contents for HP Compaq CV5500

  • Page 1 Reference Guide CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 Document Part Number: 346224-002 January 2004 This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting, regulatory notices, and technical specifications.
  • Page 2 Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of Adobe Systems Incorporated. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 3: Table Of Contents

    Attaching the Monitor Base ..... . . 3–1 Setting Up the Monitor......3–2 Connecting the Speakers (Available with Select Models) 3–4...
  • Page 4 Contents Monitor Messages ......4–10 No Signal Message ......4–10 Out of Frequency Range Message.
  • Page 5: Introduction

    Your microprocessor-based, digitally controlled color monitor is a high-performance and easy-to-use product. It employs the latest on-screen menu technology. Kit Contents The monitor kit contains: ■ CRT monitor ■ Monitor Base (pre-attached on select models) ■ Monitor AC power cord (select models) ■...
  • Page 6: Safety And Maintenance Guidelines

    Safety and Maintenance Safety Guidelines Power Requirements A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord Set Requirements”...
  • Page 7: Maintenance Guidelines

    Safety and Maintenance Guidelines Ä CAUTION: For the protection of your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS).
  • Page 8 These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ■ Do not place plants on top of your monitor. Water or dirt from the plant may get into the vents. ■...
  • Page 9: Removing The Monitor Base

    ■ Do not place the monitor face down. Damage could result to the front panel controls or the monitor screen. Removing the Monitor Base In the event that you need to disassemble the base from the monitor, follow these instructions: 1.
  • Page 10: Installation

    Attaching the Monitor Base On some monitors, the base must be attached prior to setting up the monitor. To attach the base: 1. Align the hooks on the base with the sockets on the bottom of the monitor and attach the base.
  • Page 11: Setting Up The Monitor

    Installation 2. Push the base toward the front of the monitor until it stops. Setting Up the Monitor Before setting up the monitor, place it in a convenient, well-ventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices.
  • Page 12 3. Connect the power cord 2 to the back of the monitor, then connect the power cord to a power outlet. 4. Power on your computer and monitor. ✎ If your monitor fails to function properly, refer to Appendix A, “Troubleshooting.”...
  • Page 13: Connecting The Speakers (available With Select Models)

    To install the JBL or Harman/Kardon speakers: 1. Place the control speaker 1 and the other speaker 2 on either side of the monitor. 2. Attach the speaker power cable 3 to the black connector on the back of the control speaker 1, then connect the AC adapter 4 into an electrical wall outlet.
  • Page 14: Attaching The Jbl Speakers To The Monitor

    You can attach the speakers to the monitor or place them on an even surface next to the monitor. To attach the JBL speakers to the monitor, see the following section, “Attaching the JBL Speakers to the Monitor.” Attaching the JBL Speakers to the Monitor To attach the JBL speakers to the sides of your monitor: 1.
  • Page 15: Using The Jbl Speaker Security Lock

    4. Slide the security lock out from the speaker until it engages the slot in the side of the monitor. 5. Once the lock is in place in the side of the monitor, tighten the security lock screw to secure the speaker to the monitor.
  • Page 16: Connecting Portable Output Devices To The Jbl Speakers

    Connecting Portable Output Devices to the JBL Speakers You can use the JBL speakers to listen to portable output devices such as MP3 players or CD players. To connect the device to the speakers: 1. Plug the cable (not included) from the output device into the Line In connector on the front of the speaker.
  • Page 17: Operation

    Information Files The CD-ROM included with this monitor contains two data files that must be installed onto your computer: an .INF file and an .ICM file. The .INF file designates software and defines monitor resources used by Microsoft Windows to ensure monitor compatibility with the graphics adapter in your computer.
  • Page 18: Front Panel Controls

    Right Adjustment Moves forward through menu options or increases adjustment levels. Power/LED Controls power to the monitor. The LED on the power button indicates the state of the monitor. ✎ Function The icon for the power/LED varies on select models.
  • Page 19 Model Item Icon Reference Guide Name Power/LED Controls power to the monitor. The LED on the power button indicates the state of the monitor. Select Launches on-screen displays, selects functions and adjustments, and exits menus and On-Screen Display. Left Adjustment...
  • Page 20: On-screen Display

    The On-Screen Display (OSD) adjusts the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power button to turn on the monitor. 2. Press the Select button to display the On-Screen Display menu.
  • Page 21: On-screen Display Functions

    4. Press the Select button on the monitor to choose the function. 5. The adjustment window displays. Press the Right-Adjustment or Left-Adjustment buttons to increase (Right) or decrease (Left) the level of adjustment. 6. Press Select to save the new adjustment.
  • Page 22 Operation On-Screen Display Icons and Functions Icon Function Contrast Brightness Horizontal Position Horizontal Size Vertical Position 4–6 Description Right-Adjustment increases the contrast and Left-Adjustment decreases the contrast. Right-Adjustment increases the brightness and Left-Adjustment decreases the brightness. Right-Adjustment moves the image to the right and Left-Adjustment moves the image to...
  • Page 23 On-Screen Display Icons and Functions (Continued) Icon Function Vertical Size Pincushion Trapezoid Pin Balance Reference Guide Description Right-Adjustment increases the vertical size and Left-Adjustment decreases the vertical size. Right-Adjustment makes the image sides convex and Left-Adjustment makes the image concave. Right-Adjustment adjusts the image so the top is larger and...
  • Page 24 Operation On-Screen Display Icons and Functions (Continued) Icon Function Parallelo- gram Tilt (Rotation) Moire Degauss 4–8 Description This control corrects the tilted vertical edges of the image on both sides of the screen that are in the same direction. Right-Adjustment tilts the sides of the image to the right and Left-Adjustment...
  • Page 25 Reference Guide Description Right-Adjustment selects the color temperature to the right and Left-Adjustment selects the color temperature to the left. This control resets the monitor to factory default values. This control exits the OSD menu. Operation mx704 7500 & 5500 7550 9500 4–9...
  • Page 26: Monitor Messages

    Operation Monitor Messages No Signal Message If a No Signal message displays on your monitor, check to be sure your video cable is properly connected and ensure that your computer is powered on. 4–10 Reference Guide...
  • Page 27: Out Of Frequency Range Message

    Out of Frequency Range Message If an Out of Frequency Range message displays on your monitor, your video resolution and/or refresh rate are set higher than the levels your monitor supports. To change the video resolution or refresh rate on your monitor, follow these steps: 1.
  • Page 28: Using The Energy Saver Mode

    Operation Using the Energy Saver Mode Your monitor is designed to meet strict Environmental Protection Agency (EPA) Energy Star requirements for reduced power consumption. Using a combination of hardware and software functions, this energy-saving feature allows your computer to control your monitor’s power consumption and reduce your monitor’s power state when not in use.
  • Page 29 Amber ✎ Your monitor’s energy saver feature works only when your monitor is connected to a computer that also has energy saver features. The Energy Saver utility, with its energy saving features, is available with all Microsoft Windows operating systems. Some features are also available in DOS.
  • Page 30: Solving Common Problems

    Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Screen is blank. Image appears blurred, indistinct, or too dark. Color is abnormal. Reference Guide Troubleshooting Possible Cause Power cord is disconnected. Power switch is off.
  • Page 31 Troubleshooting Problem Image is too large or too small. Image is not centered. A–2 Possible Cause Monitor may have been moved or inadvertently bumped. Horizontal width may need adjustment. Vertical height may need adjustment. Horizontal position may need adjustment. Vertical position may need adjustment.
  • Page 32 “Out of Frequency” is displayed on screen. Monitor is overheating. Reference Guide Possible Cause Monitor video cable is disconnected. Video resolution and/or refresh rate are set higher than what your monitor supports. There is not enough air space to allow proper ventilation.
  • Page 33: Using The Worldwide Web

    Using the Worldwide Web Before contacting customer services, refer to the support Web site at: http://www.hp.com/support. Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: ■...
  • Page 34: 5500/15" Series Monitor

    Technical Specifications ✎ All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP’s component manufacturers’ typical level specifications for performance and actual performance may vary either higher or lower. 5500/15” Series Monitor...
  • Page 35 Technical Specifications (Continued) Max Pixel Clock Input Signal Video Cable Power Input Voltage Frequency Inrush Current Power Consumption Dimension (W x H x D) Unpacked w/attached base Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play B–2 70 MHz Max.
  • Page 36: V72/17" Series Monitor

    Series Monitor Screen Size Dot Pitch Display Area Default Display Colors Display Resolutions 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024...
  • Page 37 Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play B–4 38 lb Max. 17 kg Max. F to 95 C to 35 F to 140 C to 60 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO’99 Select models meet MPRII Reference Guide...
  • Page 38: Mx704/17" Series Monitor

    Series Monitor Screen Size Dot Pitch Display Area Default Display Colors Display Resolutions 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024...
  • Page 39 Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play B–6 42 lb Max. 19 kg Max. F to 95 C to 35 F to 140 C to 60 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO’99 Select models meet MPRII Reference Guide...
  • Page 40: 7500/17" Series Monitor

    7500/17” Series Monitor Screen Size Dot Pitch Display Area Default Display Colors Display Resolutions 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024...
  • Page 41 Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play B–8 38 lb Max. 17 kg Max. F to 95 C to 35 F to 140 C to 60 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO’99 or TCO’03 Select models meet MPRII Reference Guide...
  • Page 42: 7550/17" Flat Crt Monitor

    7550/17” Flat CRT Monitor Screen Size Dot Pitch Display Area Default Display Colors Display Resolutions 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024...
  • Page 43 Technical Specifications Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play B–10 42 lb Max. 19 kg Max. F to 95 C to 35 F to 140 C to 60 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO’99 or TCO’03 Select models meet MPRII Reference Guide...
  • Page 44: 9500/19" Series Monitor

    9500/19” Series Monitor Screen Size Dot Pitch Display Area Default Display Colors Display Resolutions 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024...
  • Page 45 Dimension (W x H x D) Unpacked w/attached base Weight Operating Temperature Storage Temperature Humidity Altitude TCO Requirements MPRII Plug and Play B–12 17.9 x 18.5 x 18.7 inches (maximum) 455 x 470 x 475 mm (maximum) 44 lb Max. 20 kg Max.
  • Page 46: C Agency Regulatory Notices

    Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 47: Cables

    Agency Regulatory Notices Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause...
  • Page 48: Canadian Notice

    Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
  • Page 49: Japanese Notice

    Switching (ALS). This feature allows the monitor to operate on input voltages between 100-120V or 200-240V. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment. C–4...
  • Page 50 18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it.

Comments to this Manuals

Symbols: 0
Latest comments: