Connecting The Cp Valve Terminal; Connecting Cable - Festo Compact Performance Series Programming And Diagnosis

1. Installation

1.3 Connecting the CP valve terminal

1.3.1 Connecting cable

Field bus Use a twisted screened 4-core cable for the field bus.
cable The bus interface and the internal logic of the CP valve
terminal are supplied with power via the field bus cable.
PLEASE NOTE
• You must refer to the PLC manual or the user
• Select also the appropriate cable cross sections.
Note also the drop in voltage:
– in the supply line for the bus interface and
– of the internal logic of the CP valve terminal.
1-10
manual for your bus interface for instructions
regarding the choice of cable. Also take into
account the distance and the baud rate selected.
CP-CO 9905a