Festo Compact Performance Series Programming And Diagnosis page 47

2. Commissioning
PLEASE NOTE
Index 6206 determines which outputs are to assume
a default state if there is a fault.
Index 6207 determines which state the fixed outputs
are to assume if there is a fault.
The settings become active when the CP valve termi-
nal is put into the operational mode.
After switching on or resetting (hardware initializa-
tion, communication initialization), the default values
are automatically assumed. Any maskings will be
overwritten.
The following then applies:
Index Definition
6206 0 = Status of output is maintained
Subindex 1, 2
1 = Output assumes the status defined in index 6207
Bit 0 ... 7
6207 0 = Output is reset
Subindex 1, 2
1 = Output is set
Bit 0 ... 7
2-14
CP-CO 9801NH