1. Installation
1.3.4 Connecting the load voltage for the CP valves
CAUTION
Protect the load voltage circuit for the CP valve coils
with an external fuse max. 2 A.
With the external fuse you can avoid functional
damage to the CP valve terminal in the event of a
short circuit.
The load voltage is supplied via the 4-pin M12 plug on
the CP valve terminal.
Fig. 1/7: Connection for the 24 V DC load voltage
The current consumption depends on the type of valve
coil. Please refer to the "Pneumatics manual, P.BE-
CPV-.." for the values.
CP-CO 9905a
Load voltage connection
1-15