Festo Compact Performance Series Programming And Diagnosis page 16

Valve terminal with direct link

Hide thumbs Also See for Compact Performance Series:

Table of Contents

1. Installation

Setting the station number

You can set the station number of the CP valve terminal

with the address selector switches. The switches are

numbered from 0 to 9. The arrow on the address selec-

tor switches indicates the units or tens figure of the set

station number.

Address selector switch for UNITS figure

Address selector switch for TENS figure

Fig. 1/3: Address selector switches

PLEASE NOTE

Station numbers may only be assigned once per

CANopen interface.

Recommendation

Assign the station numbers in ascending order. If

necessary, take into account the machine structure of

your system when assigning the numbers.

CP-CO 9905a

1-7

Table of Contents

Cpv series