1. Installation
Recommendation:
• Connect the load voltage for the CP valves
• Check the 24 V load voltage while the system is
Pin assignment of the load voltage connection for
the CP valves
!
"
Fig. 1/8: Pin assignment of load voltage connection
1-16
(pin 2) via the EMERGENCY STOP circuit.
operating. Make sure that the load voltage still lies
within the permitted tolerances even during full oper-
ation.
!
"
n.c. (not connected)
24 V DC load voltage for CP valves
0 V load voltage for CP valves
n.c. (not connected)
CP-CO 9905a