Table of Contents
Advertisement
AS-i 3.0 Command Interface
Commands of the Command Interface
4.9.5.5
Device colors at switch off OSSD 1 - Vendor Specific Object 5
This object contains colors for all devices and additional information about all re-
lease circuits at the time of the most recent switch-off of release circuit 1. Addi-
tionally, information identifying all devices assigned to release circuit 1 is trans-
ferred.
byte
1
2
3 ... 8
9
10
11 ... 40
41
42
43 ...72
73
74
75 ... 200 ...
201
Bit-field for devices that changed during the last step.
These numbers indicate the position of the bits that correspond to a respective
device:
146
meaning
bit 0
0=configuration operation, 1=protective operation
bit 3 ... 1 reserved, 0
bit 4 state 1.Y1, EDM1 (0=open)
bit 5 state 1.Y2, Start1 (0=open)
bit 6 state 2.Y1, EDM2 (0=open)
bit 7 state 2.Y2, Start2 (0=open)
relay-state output 1+2
bit 3 ... 0 State output 1
bit 7 ... 4 State output 2
...
relay-state output 15+16
bit 3 ... 0 State output 15
bit 7 ... 4 State output 16
coding of the bit fields for existing devices. Device 7 ... 0
...
coding of the bit fields for existing devices. Device 248 ... 255
Bit-field for devices that changed during the last step. Device 7 ... 0
...
Bit-field for devices that changed during the last step. Device 248 ... 255
colors device 1+2
bit 3 ... 0 colors device 1
bit 7 ... 4 colors device 2
device 255+256
bit 3 ... 0 colors device 255
bit 7 ... 4 colors device 256
0:
device not changed during the last step
1:
device changed during the last step
Tab. 4-283.
Advertisement
Table of Contents
