Mounting The Pressure Regulator; Figure 11: Mounting The Pressure Regulator On The Chamber Rear - Binder VDL Series Operating Manual

6.2

Mounting the pressure regulator

The pressure regulator is included with the chamber and must be mounted on the chamber rear
Accessory pack for mounting the pressure regulator
(a) pressure regulator
(b) tube
(c)
(c) 6 screws
(a)
(d) brass nozzle for compressed air connection
(b)
(d)
(e) bracket
(e)
(f) cable connector
(f)
(g) 2 nuts
(g)
for the bolts with thread on the chamber rear
Connections on the chamber rear as supplied
(h) hole for the cable connection
(h)
(i)
(i)
(i) 2 bolts with thread
(c)
(a)
(e)
(f)
(g)
(b)
(d)

Figure 11: Mounting the pressure regulator on the chamber rear

VDL (E3.1) 06/2020 Page 57/206