Weekday; Start Time; Setpoint Entry - Binder VDL Series Operating Manual

19.6.2 Weekday

Section view.

19.6.3 Start time

Section view.
Select the field "Moment".

19.6.4 Setpoint entry

Section view.
VDL (E3.1) 06/2020
In the field "Weekday" select the desired weekday.
With "Daily" selected, this section will run every day
at the same time.
Entry menu "Moment".
Select with the arrow keys the desired start mo-
ment of the section and press the Confirm icon.
• Select the field "Temperature" and enter the de-
sired temperature setpoint.
Setting range: 0.0 °C up to 110.0 °C
Confirm entry with Confirm icon. The controller
returns to the section view.
• Select the field "Pressure" and enter the desired
pressure setpoint.
Setting range: 0 mbar up to 1100 mbar
Confirm entry with Confirm icon. The controller
returns to the section view.
Page 159/206