Control On/Off" Menu; Using The Optional Universal Connection "Gas/Air 2" For Ventilation - Binder VDL Series Operating Manual

Example:
Activated function " Standby " = 000000000000000
Deactivated function" Standby " = 000000000000000
11.1.2

"Control on/off" menu

More functions are available via the "Control on/off" menu.
Press the Setpoint setting icon to access the "Setpoint" setting menu from Normal display..
Setpoint > Control on/off
Path:
• Function "Temperature" (temperature control, chap. 11.4)
• Function "Pressure" (pressure control, chap. 11.5)

11.2 Using the optional universal connection "GAS/AIR 2" for ventilation

Regularly the universal connection for inert gas / ambient air "GAS/AIR" (4) is used for ventilation.
The "GAS/AIR 2" function serves to close the valve of the standard connection "GAS/AIR" (4) and acti-
vate the valve of the optional universal connection "GAS/AIR 2" (5), which is then used for ventilation
This allows convenient switching when both connections are used differently (e.g., for inert gas and am-
bient air).
If you activate the "GAS/AIR 2" function on a chamber, which is NOT equipped with the op-
tional universal connection for inert gas / ambient air "GAS/AIR 2" (5), ventilation is no longer
possible!
VDL (E3.1) 06/2020
1
0
"Setpoints" menu.
Select the field "Control on/off".
Mark / unmark the checkbox to activate / deactivate the
desired function and press the Confirm icon
Page 104/206