13.7
Current operating parameters
Press the Information icon to access the "Info" menu from Normal display.
• Select "Program operation" to see information on a currently running program.
• Select "Setpoints" to see information on the entered setpoints and operation lines.
• Select "Actual values" to see information on the current actual values.
• Select "Safety controller" to see information on the safety controller status.
13.8
Technical chamber information
Main menu > Device info
Path:
VDL (E3.1) 06/2020
"Info" menu.
Select the desired information.
Chamber name and setup
Versions of CPU, I/O module and safety con-
troller
Information on digital and analog inputs and
outputs and phase angle outputs
Information on modbus analog and digital
inputs
Information on Ethernet connection, MAC
address display
Back to main menu
for BINDER
Service
for BINDER
Service
for BINDER
Service
chap. 20.1
Page 125/206