Mounting The Vacuum Drying Oven On The Vacuum Module; Installation - Binder VDL Series Mounting Instructions

GB GB
Connection kit for
VP5
Condensate collecting tray for VP4 (MZ 2C EX)
with two screws
Condensate collecting tray for VP5 (MD 4C EX)
with two screws
3.

Mounting the vacuum drying oven on the vacuum module

3.1.

Installation

Place the vacuum drying oven on top of the vacuum module.
Sliding, falling down, or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.
∅ Do NOT lift the unit using the door handle, the door or at the lower housing.
 Lift units size 23 and 53 at its four lower corners with the aid of four people.
 Lift the units of size 115 with the aid of six people.
On the vacuum module top surface there are 4 protruding hexagon head screws. The feet of the vac-
uum drying oven provide a central recess for these screws. Place the corner feet exactly on these
screws. Thus the unit is protected against lateral sliding.
Mounting instructions for vacuum module10/2016
VDL 23 VDL 53
1 x 1 x
8012-0622 8012-0622
VDL 23 VDL 53
1 x 1 x
4022-0365 4022-0365
CAUTION
VDL 115
1 x
8012-0622
VDL 115
1 x
4022-0365
1 x
4022-0366
Page 14/32