Type Plate; Figure 2: Type Plate (Example Of Vdl 115) - Binder VDL Series Operating Manual

1.6

Type plate

Position of type plate: left chamber side (seen from front), at the bottom right-hand.
Nominal temp. 110 °C
230 °F
IP protection 20
Safety device DIN 12880
Class 2.0
Art. No. 9630-0011
Project No.
Built 2020
Indications of the type plate
(example)
BINDER
VDL 115
Vacuum Drying Oven
Serial No. 000000000000
Built 2020
110 °C
Nominal temperature
230 °F
IP protection 20
Temp. safety device DIN 12880
Class 2.0
Art. No. 9630-0011
Project No. ---
1,60 kW
7,0 A
230 V / 50 Hz
230 V / 60 Hz
1 N ~
Explosion proof inner chamber
Ex classification acc. to 2014/34/EU
Ex II 2/3/- G IIB T3 Gb/Gc/- X
Max. temp. of inner chamber surface in
cat. 2: +160 °C
Max. temp. of heating surface in cat. 3:
+185 °C
Temp. class T3
Symbol on the type plate
VDL (E3.1) 06/2020
1,60 kW / 7,0 A
230 V / 50 Hz
230 V / 60 Hz
1 N ~
VACUUM DRYING OVEN
BINDER GmbH
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
www.binder-world.com

Figure 2: Type plate (example of VDL 115)

Information
Manufacturer: BINDER GmbH
Model designation
Chamber name: Vacuum drying oven
Serial No. of the chamber
Year of construction
Nominal temperature
Type of IP protection acc. to standard EN 60529
Temperature safety device acc. to standard DIN 12880:2007
Class of temperature safety device
Art. No. of the chamber
Optional: Special application acc. to project no.
Nominal power
Nominal current
Nominal voltage +/- 10% at the indicated power frequency
Current type
Explosion proof inner chamber
Ex classification according to ATEX Directive 2014/34/EU
Maximum temperature of the inner chamber surfaces:
160 °C / 320 °F (Device category 2)
Maximum temperature of the surfaces at the heater:
185 °C / 365 °F (Device category 3)
Temperature class acc. to IEC 60079-0 for the entire cham-
ber
Information
CE conformity marking
Explosion protection symbol. Ex classification acc. to ATEX
Directive 2014/34/EU
EXPLOSION PROOF INNER CHAMBER
EX CLASSIF. ACC. TO 2014/34/EU
EX II 2/3/- G IIB T3 GB/GC/- X
MAX. TEMP. OF INNER CHAMBER
SURFACE IN CAT 2: +160 °C
MAX. TEMP. OF HEATING SURFACE
IN CAT 3: +185 °C
TEMP. CLASS T3
VDL 115
Serial No. 00000000000000
E3.1
Made in Germany
Page 13/206