Deleting A Program Section; Value Entry For A Program Section In The Section View; Set-Point Ramp And Set-Point Step Modes - Binder VDL Series Operating Manual

Section editor: "Edit section" menu

19.5.3 Deleting a program section

In the program view select the program section to be deleted. The section view opens.
In the section view press the Edit icon to open the section editor
In the section editor select "Delete section" and press the Confirm icon.
The section is deleted. The controller returns to the section view.

19.6 Value entry for a program section in the Section view

Main menu > Programs > Week program
Path:
Select the desired program and section.

19.6.1 Set-point ramp and set-point step modes

The explanation of the settings "Ramp" or "Step" is given in chap. 18.7.2.
You can define the type of temperature and pressure transitions for the entire week program.
Select the desired program and press the Edit icon to open the program editor. In the program editor
select the "Change program name" function and press the Confirm icon.
VDL (E3.1) 06/2020
Select "Replace section" to replace the selected sec-
tion with the copied section
or
Select "Insert section" to additionally add the copied
section.
Press the Confirm icon.
If you selected "Insert section" the sections are auto-
matically arranged in the correct chronological order.
"Change program name" menu.
In the field "Course" select the desired setting "Ramp"
or "Step" and press the Confirm icon.
Page 158/206