Setting Feeding Method - GRAPHTEC CE7000-130AP User Manual

2.8

Setting Feeding Method

Feeding method for the loaded media is set.
Operation
1
If you have already loaded the media, the MEDIA TYPE
menu appears. Select the media type to suit the loaded
media.
For roll media, check that the media stopper is unlocked, and
then select a media type on the MEDIA SELECT screen.
When selecting [ROLL-1
FRONT EDGE] pressing the [1] key
Select this when you have loaded a roll media and you wish
to start cutting or plotting from the leading edge.
The width and leading edge of the roll media are detected.
When selecting [ROLL-2 CURRENT
POSITION] pressing the [2] key
Select this when you have loaded a roll media and you wish
to start cutting or plotting from a point beyond the leading
edge.
Only the width of the roll media is detected.
When pressing the [3] key to select [SHEET]
Select this when a cut sheet has been loaded. The width,
leading edge, and trailing edge of the sheet are detected.
Media stopper
For roll media, before selecting the [MEDIA SET
SELECTION], make sure to release the media lock.
Supplement
•
The CONTINUE menu parameter appears
when the media set lever is raised and then
lowered again after media was previously
loaded, making it possible to select the
previous settings.
When pressing the [4] key to select
"CONTINUE".
When using the same media without changing
the position of the media, the CONTINUE
function enables the continued use of the
plotting area, pen position and origin position
that were specified before the media set lever
was lowered. If the current media is the same
size as the last media that was loaded, the
plotter does not detect the media's edges.
Supplement
When selecting [1] or [2] key
Please confirm on the confirmation screen
that the media stopper lock has been
released, then press the [ENTER] key. This
will be displayed on the above screen.
When selecting [3] key
The above screen will display when set-up
for media more than 5 meters long. Please
confirm and then press the [ENTER] key To
cancel, please lower the media set level and
change the media.
2-29
CAUTION