Table of Contents
Advertisement
4
Press the [3] key (HP-GL SEPARATOR).
HP-GL SEPARATOR screen is displayed.
5
Press the POSITION (
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to INTERFACE screen (4/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys to change the setting.
6-7
Supplement
You can set to "IN", "DF", "PS", "IW", "SC", "IP",
"SP", "NR", "PG", "AH", "AF" or "-".
When set to "-", cross cut by separator is not
performed.
Supplement
It will return to INTERFACE screen (4/4) without
changing the settings when you press the [ESC]
key (CANCEL).
Advertisement
Table of Contents
Troubleshooting
