Set F Command Of Cutting (F_Cut) - GRAPHTEC CE7000-130AP User Manual

6.1

Set F Command of Cutting (F_CUT)

With the feed command in the GP-GL command, set to Cross Cut (ON) / Not (OFF).
When this function is enabled, even if a parameter that does not cut the paper with the feed command is sent,
Cross Cut is activated.
Reference
This setting will be saved even if the power is shut off.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
3
Press the [1] key ('F' COMMAND CUT).
'F' COMMAND CUT screen is displayed.
4
Press the [1] key (ON) or the [2] key (OFF).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to MEDIA SETTING screen
(1/3).
6
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to MEDIA SETTING screen (1/3)
without changing the settings when you press
the [ESC] key (CANCEL).
6-2