5
Lower the media set lever to raise the push rollers.
6
Put the roll media on the roll media tray and then push the tip
of the roll media forward from the back of the machine. Make
sure to pull it so that there is no slackening across the roll
media's route.
Media guide bar
The paper roll media's route goes over the center bar and
behind the media guide bar.
センターバー
Center bar
Push rollers
Media set lever
メディアガイ ドバー
Media guide bar
2-11
Supplement
•
The media must always be positioned over
the media sensor.
•
See "Aligning the Push Rollers" about the
position of the push rollers.
Media sensor