GRAPHTEC CE7000-130AP User Manual page 50

Default screen (Ready Screen): READY
The condition number (Cut Condition) that has been set is displayed.
Supplement
•
In this manual, this screen is referred as READY screen or READY status.
•
In this READY status, you can set the cutting and communication conditions by pressing [PAUSE/MENU] or [COND/TEST] key.
Screen to set the corresponding conditions is displayed when the [PAUSE/MENU] key or [COND/TEST] key are
pressed.
It will return to default screen
when [PAUSE/MENU] key
is pressed while displaying
MENU screen.
Page number is displayed in the upper right corner of the screen if there are too many settings or selection that
will need multiple pages to display.
Press the POSITION (
[PAUSE/MENU]
MENU screen
) keys to move to different page.
[3] key
Example of moving page and operation button
[COND/TEST]
It will return to default screen
when [COND/TEST] key is
pressed while displaying
CONDITION setting screen.
CONDITION setting screen
POSITION (
2-26
Page number
) keys
Page number