GRAPHTEC CE7000-130AP User Manual page 119

4
Press the [1] key (SELECTS DATA FILE).
SELECTS DATA FILE screen is displayed.
5
Press the POSITION (
6
Press the [ENTER] (START).
Cutting starts with the selected file.
7
When the cutting is finished, it will become READY status.
) keys to select the file.
6-9
Supplement
•
If the USB memory is not inserted, the
following screen is displayed.
•
If there is no data in the USB memory, the
following screen is displayed.
Supplement
Press the POSITION ( ) keys to change the
file.