Structure Of Cutter Plunger - GRAPHTEC CE7000-130AP User Manual

Structure of cutter plunger

PHP33-CB09N-HS/
PHP33-CB15N-HS
Hole
CAUTION
<PHP33-CB09N-HS/PHP33-CB15N-HS>
•
Please fully insert the cutter blade straight into the plunger cap..
If the cutter blade cannot be inserted straight, please insert the cutter blade after pressing the insertion port of the cutter blade
several times.
Insertion port of the cutter blade
If not installed correctly, it may result in damage to the cutter blade or the plotter itself.
Blade-length adjustment knob
Plunger
Cutter blade
φ0.9 mm / φ1.5 mm diameter
Plunger-cap
(blue) / (red)
2-3