Related To Command Processing; Setting The Command (Command) - GRAPHTEC CE7000-130AP User Manual

Related to command processing

Setting the command (COMMAND)

There are 2 types of commands, the GP-GL and the HP-GL, that the plotter can use.
Match the setting value to the used software.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/4) is displayed.
3
Press the [2] key (COMMAND).
COMMAND screen is displayed.
4
Press the [1] key (GP-GL) or the [2] key (HP-GL).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to INTERFACE screen (1/4).
6
Press the [PAUSE/MENU] key.
It will return to default screen.
11-2