Contents Of Operation From Menu Screen - GRAPHTEC CE7000-130AP User Manual

Icon of the corresponding operation button is displayed in the screen to change the setting values.

Contents of Operation from MENU Screen

Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key are as
following:
[1] (TOOL) : Set the setting for the operation of the tool.
[2] (AXIS) : Perform settings and operations related to alignment of tool and media.
[3] (AREA) : Set the settings for area, magnification, rotation, reverse, etc., of the cutting.
[4] (MEDIA) : Set the setting of the condition for the media.
[ ] (IF) : Set the settings of the condition for the interfacing with the computer.
[ ] (ADV.) : Set the conditions for the basic operation of the cutting plotter, such as display language,
[ ] (TEST) : Does the operation necessary for maintenance, such as self diagnostic test or printout of
[ ] (MEM.) : Perform the operation necessary for output from USB memory.
[PAUSE/MENU] : MENU screen will be closed and return to default screen.
[SLOW] : Displays the position key screen. When media is set, the tool point can be moved
See the "Menu Tree" in the Appendix A.4 for list of the descriptions about each settings.
Increase or decrease the setting
value using POSITION (
keys.
Select the change unit by
[SLOW] key.
Example of screen to change the settings value
unit of the measurements and sensor.
the condition settings list.
Select the setting by number
) keys (1, 2, 3, 4) or POSITION (
) keys.
MENU screen
2-27