Media Auto Prefeed And Cross Cut - GRAPHTEC CE7000-130AP User Manual

2.9

Media auto prefeed and cross cut

When setting to FEED&CROSS CUT(exe), the media is cross-cut after feeding one page. The length of one page
is the value set in "PAGE LENGTH".
When setting to CROSS CUT(execute), the media is cross-cut at the current tool position.
Operation
1
Press the [CROSS CUT] key in READY status.
Cross Cut screen is displayed.
2
Press [1] key (CROSS CUT(execute)) or [2] key
(FEED&CROSS CUT(exe)) to begin operation.
"CROSS CUT(execute)" will start from the current tool
position when you press [1] key.
With "FEED&CROSS CUT(exe)" cross-cutting will begin after
1 page has been transferred.
3
Press the [PAUSE/MENU] key.
It will return to default screen.
Pressing [1] or [2] key activates the tool
carriage. Take care to ensure that you do not cut
your fingers on the cutter blade.
2-31
CAUTION