10.8
Switch tab
Figure 10.11: Switch tab
Activation
Deactivation
Invert
Pulse duration
Attention!
Depending on wiring, either a switching input or a switching output is available on the BCL 8.
By using an MA 8.1 or MA 8-01 connector unit, switching input and switching output can be
used simultaneously,
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Select the desired event which is to initiate the switching of the switch-
ing output here. Multiple events can also be simultaneously activated.
Shown here is the event that results in the switching output being
reset. (If the set pulse duration has not yet expired.) Multiple events
can also be simultaneously activated.
Level inverted
Duration of the switching output impulse.
BCL 8
Important parameters
53