Control Tab; Figure 10.4: Control Tab - Leuze electronic BCL 8 Series Manual

Important parameters
10.3

Control tab

Figure 10.4: Control tab

Activation
Sensor 1 function See menu "switching input"
Autostart after
decoding
Command
character
Decode delay time This point is usually used only for test purposes. After the time set
46
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
In this mode, the scanner reads via an internal trigger signal with max-
imum performance. Attention: Up to 100 codes per second may be
transmitted.
The standard online character for the trigger start is the ´+´ character.
This character can be changed only via the tree structure.
here has passed, the scanner automatically reactivates itself following
a reading gate end (e.g. in combination with "Autostart after decod-
ing").
BCL 8 Leuze electronic