Leuze electronic BCL 8 Series Manual page 65

Online commands
Acknowledge parameter message
Command
Description
Parameter
Transmit parameters
Command
Description
Parameter
Acknowledge-
ment
Example
64
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
The command acknowledges the received message and delivers an
acknowledgement status which indicates whether the message was valid
or invalid.
'PSx'
x status
'0' valid transmission
'1' invalid message
'2' invalid length of message
'3' invalid block check type
'4' invalid block check checksum
'5' invalid data length
'6' invalid message data
'7' invalid start address
'8' invalid parameter set
'9' invalid parameter type
The command transmits parameter data beginning with the set address
and stores it there in an intermediate buffer. If the status indicates that still
more messages follow, these are also stored in the intermediate buffer
before they are stored in the EEPROM under the appropriate parameter
set type. The transmission can optionally take place with a block-check
test of the message data
<BCC type> <PS type> <Status> <Start address> <Para0L> <Para0H>
[... <Para122L>][<BCC>]
'PSx'
x status
'0' valid transmission
'1' invalid message
'2' invalid length of message
'3' invalid block check type
'4' invalid block check checksum
'5' invalid data length
'6' invalid message data
'7' invalid start address
'8' invalid parameter set
'9' invalid parameter type
'PT03203305'
Address 33 (equal scans) is set to 5.
Save in RAM with reset (immediate acceptance of the change and tempo-
rary storage)
BCL 8
'PS'
'PT'
Leuze electronic