Installation; Storage, Transportation; Figure 6.1: Bcl 8 Device Name Plate - Leuze electronic BCL 8 Series Manual

6

Installation

6.1

Storage, transportation

Attention!
When transporting or storing, package the device so that it is protected against collision and
humidity. Optimum protection is achieved when using the original packaging. Heed the re-
quired environmental conditions specified in the technical data.
Unpacking
Check the packaging for any damage. If damage is found, notify the post office or ship-
ping agent as well as the supplier.
Check the delivery contents using your order and the delivery papers:
• Delivered quantity
• Device type and model as indicated on the nameplate
• Laser warning signs
• Brief manual
The name plates provide information as to what BCL type your device is. For specific infor-
mation, please refer to chapter 4.4.1.
BCL 8 name plate
BCL 8 type designation
Figure 6.1:
Save the original packaging for later storage or shipping.
If you have any questions concerning your shipment, please contact your supplier or your
local Leuze electronic sales office.
Observe the applicable local regulations when disposing of the packaging materials.
Cleaning
Clean the glass window of the BCL 8 with a soft cloth before mounting. Remove all pack-
aging remains, e.g. carton fibres or Styrofoam balls.
Attention!
Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
BCL 8 device name plate
BCL 8
Installation
29