Leuze electronic BCL 8 Series Manual page 60

Read reference code
Command
Description
Parameter
Acknowledge-
ment
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
The command reads out the reference code defined in the BCL 8. If no
parameters are specified, all defined codes are output.
<Reference code number>
'1' Reference code 1
'2' Reference code 2
If no reference codes are defined, the BCL 8 responds with the 'RS' com-
mand and corresponding status (see command RS).
For valid codes, the output corresponds to the following format:
RCyvxxzzzzzz
y, v, x and z are placeholders (variables) for the actual input.
y def. reference code no.
'1' (Code 1)
'2' (Code 2)
v memory location for reference code
'0' RAM+EEPROM
'3' RAM only
xx def. code type (see command 'CA')
z def. code information (1 ... 30 characters)
BCL 8
Online commands
'RR'
59