10
Important parameters
10.1
Decode tab
Figure 10.1: Decode tab
Code table
Element
number
Notice!
If the code EAN128 is to be read, 3 additional characters are to be set for the code identifier.
Properties
Number of
barcodes
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Here, the codes which are to be decoded are set. We recommend enabling
only the code types which are to actually be read with the corresponding
element numbers. Codes which are not enabled are not decoded!
In the field Element number, up to 3 element entries may be entered.
An area is represented by a dashed line:
With 2 or 3 different element entries
by a comma: e.g:
The combination is also possible,
but the range must be specified first:
Behind the "Properties" button, to the right of the respective code, the
code-specific settings, such as the check digit, can be selected.
Here, the number of the barcodes to be decoded within a read cycle (one
reading gate) is set.
BCL 8
Important parameters
e.g. 4-40 digits.
8,13 digits
e.g.: 4-10,20 digits
43