10.8
Switch tab
Figure 10.11: Switch tab
Activation
Deactivation
Inverted
Pulse duration
ATTENTION!
Depending on wiring, either a switching input or a switching output is available on the
BCL 8.
By using an MA 8.1 or MA 8-01 connection unit, switching input and switching output can
be used simultaneously.
Leuze electronic
Select the desired event which is to initiate the switching of the switch-
ing output here. Multiple events can also be simultaneously activated.
Shown here is the event which results in the switching output being
reset if the set pulse duration has not yet expired. Multiple events can
also be simultaneously activated.
Level inverted.
Duration of the switching output impulse.
BCL 8
Important parameters
57