Leuze electronic BCL 8 Series Manual page 59

Online commands
Teach-In
Command
Description
Parameter
Acknowledge-
ment
Notice!
With this function, only code types are recognised that are identified using the autoConfig
function or which were set in the set-up.
After each reading via an 'RTy' command, explicitly switch off the function again since
failure to do so will interfere with other commands as well as prevent execution of a new
'RTy' command.
58
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
This command enables a reference code to be defined quickly by reading
an example label.
'RTy'
y Function
'1' defines reference code 1
'2' defines reference code 2
'+' activates the definition of reference code 1 or 2
'-' exits the Teach-In process
The BCL 8 first responds with the command 'RS' and corresponding sta-
tus (see command RS). After a barcode has been read, it sends the result
in the following format:
'RCyvxxzzzzz'
y, v, x and z are placeholders (variables) for the actual input.
y def. reference code no.
'1' (Code 1)
'2' (Code 2)
v memory location for reference code
'0' RAM+EEPROM
'3' RAM only
xx def. code type (see command 'CA')
z def. code information (1 ... 30 characters)
BCL 8
'RT'
Leuze electronic