Leuze electronic BCL 8 Series Manual page 58

Manually define reference code
Command
Description
Parameter
Acknowledge-
ment
Example
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
This command can be used to define a new reference code in the BCL 8
by means of direct input via the serial interface. The data is saved in the
parameter set according to your input under reference code 1 or 2 and
stored in the working buffer for direct further processing.
'RSyvxxzzzzzzzz'
y, v, x and z are placeholders (variables) for the actual input.
y def. reference code no.
'1' (Code 1)
'2' (Code 2)
v Storage location for reference code:
'0' RAM+EEPROM
'3' RAM only
xx def. code type (see command 'CA')
z def. code information (1 ... 30 characters)
'RSx'
x status
'0' valid 'Rx' command
'1' invalid command
'2' insufficient memory for reference code
'3' reference code has not been saved
'4' reference code invalid
Input = 'RS130678654331'
(Code 1 (1), RAM only (3), UPC (06), code information)
BCL 8
Online commands
RS
57