DRP 7.15 Feeder Cover Switch (PL22.1.16)
Use this procedure to remove and replace both Feeder Cover Switches.
Removal
1. Remove the LCIF Right Cover (DRP 7.6)
2. Press together the Feeder Cover Switch latches as you remove the Switch from the LCIF frame.
3. Disconnect the P/J from the Switch.
Replacement
1. Reconnect the P/J to the Feeder Cover Switch.
2. Position the Feeder Cover Switch so the actuator faces out and press the Switch latches against the cutout
in the LCIF frame.The Switch snaps in to place.
3. Reinstall the LCIF Right Cover (DRP 7.6).
magicolor 330 Large-Capacity Input Feeder Service Manual
LCIF-77