MINOLTA-QMS magicolor 330 Service Manual page 21

2.5.5 Feed from OPT3 Tray
At the start of a print cycle the OPT3 Tray Feed Roll moves a single sheet of paper out of OPT3 Tray and into
the OPT3 Tray Turn Roll. The OPT3 Tray Turn Roll drives the sheet of paper up into the OPT2 Tray Turn Roll.
OPT2 Tray Turn Roll drives the sheet of paper up into the OPT1 Tray Turn Roll. OPT1 Tray Turn Roll drives the
sheet of paper up into the Upper Tray Turn Rol l . Upper Tray Turn Roll drives the sheet of paper into the Base
Engine Pre-Registration Roll. The remaining paper path is identical to paper that is fed from either Upper Tray
or from the MSI.
Base Engine
HCF
RS1787XA
magicolor 330 Large-Capacity Input Feeder Service Manual
Pre-Registration Roll
& Pinch Roll
Tray 1
Tray 2
Tray 3
Tray 4
Feed Roll
MSI
Turn Roll & Pinch Roll
LCIF-17