MINOLTA-QMS magicolor 330 Service Manual page 65

Large-capacity input feeder
Table of Contents

Advertisement

DRP 7.7 LCIF Right Cover (PL21.1.20)
Removal
1. Slide Trays 2, 3, and 4 a few inches out of the LCIF.
2. Remove the five screws securing the LCIF Right Cover to the LCIF frame and remove the Cover.
3. Open the LCIF Cover.
4. Slide the Right Cover to the front, to feed the rear latch, and remove the Cover.
Replacement
1. Slide Trays 2, 3, and 4 a few inches out of the LCIF.
2. Open the LCIF Cover.
3. Reinstall the LCIF Right Cover to the LCIF frame by sliding the rear latch into the tab at the rear of the LCIF.
4. Close the LCIF Cover.
5. Reposition the LCIF Right Cover so the five screw holes in the Cover line up with the five screw holes in the
LCIF frame.
6. Use five screws to secure the Right Cover to the LCIF frame.
7. Slide Trays 2, 3, and 4 back into the LCIF.
magicolor 330 Large-Capacity Input Feeder Service Manual
LCIF-61

Advertisement

Table of Contents
loading

Table of Contents