DRP 7.10 Turn IN Cover (PL22.1.3)
Use this procedure to remove and replace the Turn IN Covers for OPT1 Tray, OPT2 Tray, or OPT3 Tray of the
LCIF.
Removal
1. Remove the LCIF Cover Assembly (DRP 7.8).
2. Press in on the pivot arms of the Turn IN Cover and remove them from the pivot holes in the HFC frame.
Replacement
1. Insert the front pivot arm of the Turn IN Cover into the front pivot hole in the HFC frame.
2. Press in on the rear pivot arm of the Turn IN Cover and insert it into the rear pivot hole in the HFC frame.
3. Position the bottom lip of the Turn IN Cover so it is behind the top lip of the adjacent Turn Cover.
magicolor 330 Large-Capacity Input Feeder Service Manual
LCIF-67