DRP 7.4 LCIF Harness Cover (PL21.1.3)
Removal
1. Remove the LCIF Rear Cover (DRP 7.2).
2. Open the LCIF Harness Cover and free the wire harness from the Wire Harness Clamp.
3. Remove the E ring securing the LCIF Harness Cover to the LCIF frame.
4. Slide the Harness Cover to the front of the LCIF and remove the Cover from the LCIF frame.
Replacement
1. Reinstall the LCIF Harness Cover onto the LCIF frame by sliding the two pivot arms of the Cover into the
two holes in the frame.
2. Use one E ring to secure the Cover to the LCIF frame.
3. Reinstall the wire harness into the Wire Harness Clamp.
4. Reinstall the LCIF Rear Cover (DRP 7.2).
magicolor 330 Large-Capacity Input Feeder Service Manual
LCIF-55