MINOLTA-QMS magicolor 330 Service Manual page 44

Step
8
COVER ASSEMBLY INSPECTION
Open the LCIF Cover Assembly and inspect it and the
attached Pinch Rolls for damage.
Is the Cover Assembly in good condition and undam-
aged?
9
TURN IN COVER INSPECTION
With the LCIF Cover Assembly open, inspect the three Turn In
Covers for damage.
Are the three Turn IN Covers in good condition and
undamaged?
10
TURN ROLL TEST
1. Enter Diagnostics and run the LCIF Feeder Motor.
2. While the LCIF Feeder Motor is running run the Diagnostic
tests that switch on the OPT1 Tray, OPT2 Tray, and Tray 4
Turn Roll Solenoids.
3. With the LCIF Cover Assembly open, inspect the three
sets of Turn Rolls
Do all three sets of Turn Rolls rotate?
LCIF-40
Actions and Questions
magicolor 330 Large-Capacity Input Feeder Service Manual
Yes
Go to step 9 Replace
LCIF
Assembly
(LCIF
6.8)
Go to step 10 Replace the
damaged
LCIF Turn IN
Cover (LCIF
DRP 6.9)
Inspect th Replace the
Turn Roll area Turn Clutch
of Upper Tray for the Turn
for damage or Rolls that do
obstructions not rotate
that could (LCIF DRP
cause dam- 6.16)
age to paper
fed from th
LCIF
No
the
Cover
DRP