MINOLTA-QMS magicolor 330 Service Manual page 19

2.5.3 Feed from OPT2 Tray
At the start of a print cycle the OPT2 Tray Feed Roll moves a single sheet of paper out of OPT2 Tray and into
the OPT2 Tray Turn Roll. The OPT2 Tray Turn Roll drives the sheet of paper up into the OPT1 Tray Turn Roll.
OPT1 Tray Turn Roll drives the sheet of paper up into the Upper Tray Turn Roll. Upper Tray Turn Roll drives the
sheet of paper into the Base Engine Pre-Registration Roll. The remaining paper path is identical to paper that
is fed from either Upper Tray or from the MSI.
Base Engine
HCF
magicolor 330 Large-Capacity Input Feeder Service Manual
Pre-Registration Roll
& Pinch Roll
Tray 1
Tray 2
Tray 3
Feed Roll
Tray 4
MSI
Turn Roll & Pinch Roll
LCIF-15