MINOLTA-QMS magicolor 330 Service Manual page 61

DRP 7.5 Cover Bracket (PL21.1.4)
Removal
1. Remove the LCIF Harness Cover (DRP 7.3).
2. Remove the Wire Harness Clamp from the Cover Bracket.
3. Remove the two screws securing the Cover Bracket to the LCIF frame and remove the Bracket.
Replacement
1. Reinstall the Cover Bracket onto the LCIF frame.
2. Line up the two screw holes in the Bracket with the two screw holes in the LCIF frame.
3. Use two screws to secure the Bracket to the frame.
4. Reinstall the Wire Harness Clamp onto the Cover Bracket.
5. Reinstall the LCIF Harness Cover (DRP 7.3).
magicolor 330 Large-Capacity Input Feeder Service Manual LCIF-57