MINOLTA-QMS magicolor 330 Service Manual page 67

DRP 7.8 LCIF Front Cover (PL21.1.1)
Removal
1. Remove the LCIF Left Cover (DRP 7.5).
2. Remove the LCIF Right Cover (DRP 7.6).
3. Remove the two screws securing the Front Cover to the front of the LCIF frame and remove the Cover.
Replacement
1. Slide OPT1 Tray a few inches out of the LCIF.
2. Line up the two locating pins on the back of the LCIF Front Cover with the two locating holes in the LCIF
frame and reinstall the LCIF Front Cover onto the LCIF frame.
3. Use two screws to secure the Front Cover to the LCIF frame.
4. Reinstall the LCIF Right Cover (DRP 7.6).
5. Reinstall the LCIF Left Cover (DRP 7.5).
magicolor 330 Large-Capacity Input Feeder Service Manual LCIF-63