Spectrum Monitor Option Subsystem - Keysight N9322C Programmer's Manual

Command Reference

Spectrum Monitor Option Subsystem

Spectrum Monitor Option Subsystem

Key access:
Key access:
126
The spectrum monitor subsystem provides you the SCPI
commands reference for the spectrum monitor with
spectrogram record and playback function. Use the command
:INSTrument SA, and:INSTrument:MEASure
SPECtrogram to access this subsystem.
Option MNT is required to enable this function.
Spectrogram State
[:SENSe]:SPECtrogram:STATe RUN|PAUSe
[:SENSe]:SPECtrogram:STATe?
Use this command to run or pause spectrogram
measurement.
Example:
:SPECtrogram:STATe PAUSe
Meas > Spectrogram Run/Pause
Spectrogram Restart Measurement
[:SENSe]:SPECtrogram:RESTart
Use this command to restart spectrogram measurement.
Example:
:SPECtrogram:RESTart
Meas > Restart Meas
Spec Update Interval
[:SENSe]:SPECtrogram:UINTerval <value>
[:SENSe]:SPECtrogram:UINTerval?
This command defines the update interval of spectrogram
measurement.
Example:
:SPECtrogram:UINTerval 1 s
[:SENSe]:SPECtrogram:UINTerval:STATe OFF|ON|0|1
[:SENSe]:SPECtrogram:UINTerval:STATe?
Use this command to turn on/off update interval of current
test.