Chapter 10 Development Guide; Enter X86 Open Platform; Operation Process; Adjust Image - HikRobot X86 User Manual

X86 Open Platform User Manual
·

Chapter 10 Development Guide

10.1 Enter X86 Open Platform

Function development needs to be configured inside the X86 open platform. You can use a VGA or
HDMI cable to connect display and external devices, or use a personal computer to operate via
remote desktop.
Follow the steps below to enter the platform via remote desktop.
Steps:
1. Find the IP address of the platform in the device information panel.
2. Use remote desktop tool to connect to the IP address.
3. Enter user name and password to enter the platform. Default user name is administrator, and
password is Operation666.
Figure 10-1 Enter the Platform via Remote Desktop
You are highly recommended to change the password after first login, and use remote control as
needed.

10.2 Operation Process

10.2.1 Adjust Image

Steps:
1. After entering the platform remotely, find the client software, and double click to open it.
49