Connecting The Power - Ricoh MV310E Operator's Manual

Connecting the Power
APPENDIX A: INSTALLATION
Connecting the Power
IMPORTANT POINTS ABOUT POWER CONNECTION
If you have to use an extension cord, make sure that it is capable of carrying
125V/15A, and that your facsimile terminal is the only piece of equipment
connected to that cord.The supply from the wall outlet must not fluctuate more
than 20 V either side of 115 Vat.
The power cord should not be laid in a place where it might trip somebody.
Do not lay anything on the power cord.
WARNING:
The power source must conform to the specifications on page
133.
WARNING:
Make sure the power source is properly grounded.
WARNING:
Follow the safety instructions given of pages i to iv.
El
Insert the plug into the wall outlet.
El
Turn on the power.
145